EnGenius Technologies IEEE 802.11b Outdoor Wireless Client Bridge Manual Do Utilizador

 

„ 

 
Step 1  Enter the IP Address manually into the Bridge IP Address field. 
 
Step 2  Use Bridge IP Address setting to assign or change the bridge’s IP 

address.

 

Step 3  Click FINISH at the bottom of this page to complete the 

modification of IP address. 

 
 

 
Select the “/General Config/ TCP/IP/SNMP”, and the SNMP screen 
appears. The figure below shows the current SNMP community pool and 
trap host pool. 
 
 

 
The SNMP Community Pool has five entries.  
  

1.  To modify the entry, click the select button beside the entry 

index number and click Modify. The configuration page 
appears as the figure shown below. 

 

 

2.  Specify the Validity, Access Right and Community field. 

 

9 

Validity. Select Enable or Disable to control this 
community.

 

 

9 

Access Right. Select a command from the pull down menu 
for this field.  

 

9 

Community. Enter the password related the Access Right 
in this field.  

 

3.  Click OK to refresh the current community pool. 

4.  To modify another community entry to the current community 

pool, repeat step 1 through step 3. 

5.  When you have modified all the entries preferred, click FINISH.