Sanyo DSR - 300 Manual Do Utilizador
ALARM REC MODE SET
8
66
English
SE
TTIN
TTIN
GS <MAIN
MENU 1>
1
Move the cursor to “PRE-ALARM
RECORDING” and press the [ ] button,
then press the [
RECORDING” and press the [ ] button,
then press the [
] or [
] button to
change the setting.
[Settings] ( indicates default setting.)
2
Move the cursor to “REC RATE” and
“DURATION” and press the [ ] button,
then press the [
“DURATION” and press the [ ] button,
then press the [
] or [
] button to
change the setting.
The maximum number of images (shown in parentheses)
changes in accordance with the new settings.
changes in accordance with the new settings.
[Setting conditions]
z
z
When performing pre-alarm recording with a “FIELD”
recording rate, short settings (i.e., 60.00 or 30.00 FPS)
cannot be made for “REC RATE”. (JP. 48)
recording rate, short settings (i.e., 60.00 or 30.00 FPS)
cannot be made for “REC RATE”. (JP. 48)
z
When normal recording and pre-alarm recording are
performed simultaneously, audio will not be recorded
together with the pre-alarm recording image.
performed simultaneously, audio will not be recorded
together with the pre-alarm recording image.
z
When pre-alarm recording and normal recording are
performed simultaneously with a multiplexer connected,
the recording rate for pre-alarm recording should be set
to a shorter rate than that for normal recording.
performed simultaneously with a multiplexer connected,
the recording rate for pre-alarm recording should be set
to a shorter rate than that for normal recording.
z
Although the image from a single camera may be
recorded continuously when a short recording rate is
set, a long rate can result in no images being recorded
during normal recording.
recorded continuously when a short recording rate is
set, a long rate can result in no images being recorded
during normal recording.
Press the [EXIT/OSD] button.
The display returns to the normal screen.
“PRE” appears in the operation display area. When an
alarm occurs, “ALARM” is displayed.
“PRE” appears in the operation display area. When an
alarm occurs, “ALARM” is displayed.
This setting indicates how intruders are to be detected.
1
Move the cursor to “ALARM TRIGGER”
and press the [ ] button, then press the
[
and press the [ ] button, then press the
[
] or [
] button to change the
setting.
[Settings] ( indicates default setting.)
[Setting conditions]
z
z
When sensor selection has been made (i.e.,
“SENSOR”, “ALARM AND SENSOR”, or “ALARM OR
SENSOR”) it will be necessary to set the motion
sensors.
“SENSOR”, “ALARM AND SENSOR”, or “ALARM OR
SENSOR”) it will be necessary to set the motion
sensors.
(J
P. 67)
Setting pre-alarm recording
Setting
Description
OFF
Pre-alarm recording is not carried out
ON
Pre-alarm recording is carried out
Maximum number
of images
When settings have been completed
Setting the alarm trigger
Setting
Description
ALARM
Performs alarm recording when an external
alarm is generated (when a switch is attached to
the alarm input terminal on the rear panel, and
the switch is activated).
SENSOR
Performs alarm recording when a motion sensor
detects movement. See the information on
setting motion sensors. (JP. 67)
ALARM
AND
SENSOR
AND
SENSOR
Performs alarm recording when both the
external alarm and a motion sensor are
activated simultaneously.
ALARM OR
SENSOR
SENSOR
Performs alarm recording when either the
external alarm or a motion sensor is activated.
Number of alarm
recordings
PRE display
PRE display
10-20-04 PRE
0023
08: 30: 00 EN
10FPS
e00_l8had_us_7.book Page 66 Wednesday, March 10, 2004 2:47 PM