Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Sanyo
  4. DSR - 300
  5. Manual Do Utilizador

Sanyo DSR - 300 Manual Do Utilizador

Download
Página de 136
ALARM REC MODE SET
8
English
67
z
This unit’s motion sensors cannot be used when a 
multiplexer is connected. In such a case, please use the 
multiplexer’s motion sensors.
z
When using the multiplexer’s motion sensors, connect 
the alarm output on the multiplexer to this unit’s alarm 
input.
z
When using a multiplexer, connect its ground terminal 
and the recorder's ground terminal.
If a motion sensor is set on the monitor, alarm recording 
will be carried out when a moving subject is detected.
1
Move the cursor to “MOTION SENSOR” 
and press the [ ] button. 
The motion sensor screen is displayed. 
2
Press the [ ] or [ ] button to select 
sensor operation positions (up to 80), 
then press the [
] or [
] button to 
confirm the selection. 
Press the [
] or [
] button to turn sensors “ON” (shown 
as J) and “OFF” (shown as 
).
3
Move the cursor to “LEVEL”, then press 
the [
] or [
] button to change the 
setting.
[Settings] (‹ indicates default setting.)
4
Move the cursor to “EXIT”, then press 
the [
] or [
] button to return to the 
<ALARM REC MODE SET> screen.
5
Press the [EXIT/OSD] button.
The display returns to the normal screen.
„
If recording is ended during alarm recording 
using the motion sensor
Set the sensitivity from the motion sensor screen to 
“OFF”. (See the procedure 3.)
z
Pressing the [MENU RESET] button in the motion 
sensor screen sets the entire row in which the cursor is 
located.
Setting the motion sensor
Motion sensor 
screen
Setting
example
Setting
Description
‹
OFF
Not carried out
1 to 10
Motion sensing will be carried out. Lower values 
correspond to higher sensitivities.
e00_l8had_us_7.book  Page 67  Wednesday, March 10, 2004  2:47 PM