Справочник Пользователя для Mitel 2700-1398-B1
Mitel NuPoint Messenger Technical Documentation - Release 7.0
•
The User Interface
Overview
The Pager application causes the NuPoint Messenger server to initiate, rather than receive, a
telephone call. Don’t let the name “Pager application” confuse you. It is used for paging, but also
for a number of other functions that require outdials. An outdial is a call placed by the server. Two
other uses of this application are message delivery and call placement. Some optional features,
such as NuPoint Fax and Cut-through Paging, use the Pager application as well.
telephone call. Don’t let the name “Pager application” confuse you. It is used for paging, but also
for a number of other functions that require outdials. An outdial is a call placed by the server. Two
other uses of this application are message delivery and call placement. Some optional features,
such as NuPoint Fax and Cut-through Paging, use the Pager application as well.
Paging is a function that allows the server to notify a mailbox owner when a message arrives in
the mailbox by activating a radio pager. Parameters can be set to limit the hours that a page may
be sent, or the types of messages that activate a page. For information on Cut-through Paging,
see the Cut-through Paging optional feature documentation.
the mailbox by activating a radio pager. Parameters can be set to limit the hours that a page may
be sent, or the types of messages that activate a page. For information on Cut-through Paging,
see the Cut-through Paging optional feature documentation.
Message delivery is a function that allows the server to notify a mailbox owner when a message
has been received, by calling the mailbox owner at a predefined telephone number and allowing
the owner to log into the mailbox. Parameters can be set to limit the hours that a message
delivery may be made, or the types of messages that activate the message delivery.
has been received, by calling the mailbox owner at a predefined telephone number and allowing
the owner to log into the mailbox. Parameters can be set to limit the hours that a message
delivery may be made, or the types of messages that activate the message delivery.
Call placement is similar to message delivery, in that it places a call to a telephone number. In
this case, the message is made
this case, the message is made
by
(rather than to) the mailbox owner. The message is addressed
to a telephone number rather than to a mailbox. The answering party does not have to log in to
hear the message. Call placement was formerly known as “off-system messaging.”
hear the message. Call placement was formerly known as “off-system messaging.”
Procedures
You can perform the following procedures with the Pager application. These procedures are
located in Volume 2 of this manual.
located in Volume 2 of this manual.
Procedure Number
Call Placement
Call Placement
Enable Call Placement
CP 3306
Test Call Placement
CP 3362
Message Delivery Configuration
Message Delivery Configuration
CP 3337
Allow Mailbox Owners to Control Message Delivery
CP 3339
Allow Receipt of Urgent Pages or Urgent Message Delivery Only
CP 3344
Configure a Mailbox For Message Delivery
CP 5018
Define a Pager System for Message Delivery
CP 5013
Set Limits for Message Delivery
CP 3338
Set Paging or Message Delivery Schedules and Intervals
CP 3321
Test Message Delivery
CP 3361
Turn All Pagers or Message Delivery in a Mailbox On or Off
CP 5014
Paging
Display Pager Configuration
CP 3330
Tone Pager Configuration
CP 3343
Voice Pager Configuration
CP 3335
Allow Mailbox Owners to Control Paging
CP 3332
Allow Receipt of Urgent Pages or Urgent Message Delivery Only
CP 3344
Assign an Alternate Pager to a Mailbox
CP 3334
Configure a Mailbox for Paging
CP 5019
©Copyright 2002, Mitel Networks Corporation
37