Справочник Пользователя для Majestic Appliances 33LDVR

8

The EB-1 Electrical junction box has been fitted stand-

ard on this model to allow for the easy connection of an 

optional fan kit. 

To connect the EB-1 box to the house electrical supply 

follow the steps below.

1.  Unscrew the retaining screw from the EB-1 base 

plate and remove the EB-1 assembly from the  

appliance. (Fig. 8)

2.  Remove the front cover of the EB-1 box.

3.  Remove the plug socket assembly from the EB-1 

box.

4.  Feed the supply line in through the EB-1 opening in 

the side of the appliance and then through the back 

of the EB-1 assembly. (Fig. 8)

5.  Connect the black wire of the power supply line to 

the brass screw (polarized) of the socket assembly.

6.  Connect the white wire of the power line to the 

chrome screw of the socket assembly.

7.  Connect the ground wire of the supply line to the 

green screw of the socket assembly.

8.  Refit the socket assembly back into the electrical 

box and replace the cover plate. Secure the cable 

with the clamp on the outside of the EB-1 base 

plate and refit the EB-1 assembly to the unit with the 

screw removed in step 1.

wall thermostat on electronic ignition units. 
1.  Thread the wiring through the holes on the side 

panels of the appliance. Take care not to cut the wire 

or insulation on metal edges. Route the wire to a 

conveniently located receptacle box.

2.  Attach the wire to the ON/OFF switch and install the 

switch into the receptacle box.

3.  Connect the white wire from the wall switch or wall 

thermostat to the white wire terminal from the elec-

tronic module. Connect the black wire from the wall 

switch or the red wire from the wall thermostat, to 

the red wire terminal from the electronic module.

FP580

INSTA VENT FREE

EB1 JUNCTION BOX

11/18/97

BACK OF UNIT

FP580

Electrical Box

Retaining Screw

Fig. 8  EB-1 receptacle.