Справочник Пользователя для Majestic Appliances 33LDVR
6
LDVR Series Direct Vent Gas Fireplace
10007317
Max.
Min.
Input
Input
Model
Fuel Gas Control BTU/h BTU/h
33LDVRRN Nat
Millivolt
16,000 11,200
33LDVRRP Prop
Millivolt
16,000 12,000
33LDVREN Nat
24V Hi/Lo
16,000 11,200
33LDVREP Prop* 24V Hi/Lo
16,000 12,000
36LDVRRN Nat
Millivolt
19,500 13,650
36LDVRRP Prop
Millivolt
19,500 14,625
36LDVREN Nat
24V Hi/Lo
19,500 13,650
36LDVREP Prop* 24V Hi/Lo
19,500 14,625
39LDVRRN Nat
Millivolt
23,000 16,100
39LDVRRP Prop*
Millivolt
22,500 16,875
39LDVREN Nat
24V Hi/Lo
23,000 16,100
39LDVREP Prop* 24V Hi/Lo
22,500 16,875
43LDVRRN Nat
Millivolt
26,000 18,200
43LDVRRP Prop*
Millivolt
24,000 18,000
43LDVREN Nat
24V Hi/Lo
26,000 18,200
43LDVREP Prop* 24V Hi/Lo
24,000 18,000
Noncombustible materials such as brick or tile may be
extended over the edges of the face of the fireplace.
DO NOT cover any vent or grille panels.
If a Trim Kit is going to be installed on the fireplace, the
brick or tile will have to be installed flush with the edges
of the fireplace.
Final Finishing
Gas Specifications
33LDVR / 36LDVR / 39LDVR / 43LDVR
Certified To
ANSI Z21.88b-2003 / CSA 2.33b-2003
Vented Gas Fireplace Heaters
Framing and Finishing
Inlet Minimum
5.5” w.c.
11.0” w.c.
Inlet Maximum
14.0” w.c.
14.0” w.c.
Manifold Pressure
3.5” w.c.
10.0” w.c.
Gas Inlet and Manifold Pressures
Natural
LP (Propane)
High Elevations
Input ratings are shown in BTU per hour and are
certified without deration for elevations up to
4,500 feet (1,370m) above sea level.
For elevations above 4,500 feet (1,370m) in USA,
For elevations above 4,500 feet (1,370m) in USA,
installations must be in accordance with the cur-
rent ANSI Z223.1/NFPA 54 and/or local codes hav-
ing jurisdiction.
In Canada, please consult provincial and/or local
In Canada, please consult provincial and/or local
authorities having jurisdiction for installations at
elevations above 4,500 feet (1,370m).
Check fireplace to make sure it is levelled
and properly positioned.
To mount the appliance:
1. Choose the location.
2. This unit comes with four (4) flanges pre-mounted
on both sides of the fireplace to allow two different
drywall thicknesses to be used. Flange “A” is for
1/2” drywall while flange “B” is for 5/8” drywall.
3. Bend the desired flanges out 90° on both sides of
the fireplace. Slide the fireplace into the framed
opening until the flanges contact the front surfaces
of the framing. Level the unit and secure it firmly in
place.
FP1544
nail flange
1/05
Fig. 4 Nailing flanges.
Flange
Drywall
Position
Depth
A
1/2” / 13 mm
B
5/8” / 16 mm
Flange Location for
Desired Drywall Depth
FP1539
A
B
33LDVR units: GFRN2I0, GFRL2I0, GFRE2I0
36LDVR units: GFRN2J0, GFRL2J0, GFRE2J0
39LDVR units: GFRN2K0, GFRE2K0
43LDVR units: GFRN2N0, GFRE2N0
36LDVR units: GFRN2J0, GFRL2J0, GFRE2J0
39LDVR units: GFRN2K0, GFRE2K0
43LDVR units: GFRN2N0, GFRE2N0
*Using conversion kit