Справочник Пользователя для Hitachi RAS-SX10HAK / RAC-SX10HAK

Скачать
Страница из 96
• If you want to set the desired temperature and humidity during dry cool operation, we recommend 
you use the manual cooling operation. (Page 17)
STOP
DRY COOL OPERATION
When you operates cooling operation with the dry function, press the   (DRY COOL) button, the air conditioner 
automatically sets temperature and humidity in dry cool mode. 
Press the   (DRY COOL) button.
•  Adjust the room temperature and fan speed to your preference. 
•  Every time you press the 
 (ROOM TEMPERATURE) button, the 
temperature will change by 1°C. 
  (Temperature setting range from the auto set temperature is not higher or 
lower than 3°C.)
Press the 
 (STOP) button.
•  A short beep sounds and dry cool operation stops.
Humidity
to be set
Temperature
to be set
Based on the detected outside and room temperature, 
the temperature is set on an hourly basis within the range 
of 24~28°C.
• Even if the room temperature 
reached the preset temperature, 
the air conditioner may continue 
to operate if the preset humidity 
has not been reached.
50% when temperature above 27°C is set.
55% when temperature of 26°C is set.
60% when temperature below 25°C is set.
Dry 
intermittent
operation
Dry cool operation
Operation 
stops
Cooling 
operation
About 3ºC
Approx. 3°C if outside temp. is 
below approx. 32°C.
Approx. 1°C if outside temp. is 
above approx. 32°C.
Room temperature set
Current room temperature
About 1ºC
The operation mode may automatically be switched to cooling or heating for temperature control.
If the room temperature is lower than the preset temperature, intermittent operation (repeat of operation state 
and stop state) is performed to avoid excessive lowering of temperature and to control the humidity.
DEUTSCH
FRANÇAIS
IT
ALIANO
SP
ANISH
POR
TUGUÊS
∂ÏÏËÓÈο
РУССКИЙ
– 16 –
C
M
Y
CM
MY
CY
CMY
K
EN_16.ai   2010-7-14   9:42:48
EN_16.ai   2010-7-14   9:42:48