Справочник Пользователя для Hitachi RAS-SX10HAK / RAC-SX10HAK

• 

• 

• 

Press the 

 (HEAT) button to start heating operation.

Press the 

 (HEAT) button.

•  Adjust the room temperature and fan speed to your preference.
  Temperature range between 16°C~32°C can be set. 

Press the 

 (STOP) button.

A short beep sounds and heating operation stops.

3 types of dehumidifying operations can be performed by pressing the 

 (DEHUMIDIFY) button.

Performs powerful dry operation without lower down the room temperature.

Press the 

 (DEHUMIDIFY) button.

•  Every time you press the 

 (DEHUMIDIFY) button, 

the mode will change as shown in the chart below.

Condensation

Control

Auto 

Dehumidifying

Quick 

Laundry

(“AUTO” flashes for 5 seconds)

•  In auto dehumidifying mode, fine adjustment of room temperature,humidity 

adjustment and fan speed selection can be made to your preference. 
 Every time you press the ROOM TEMPERATURE button, the temperature will change 
by 1°C. (Temperature setting range is not higher or lower than 3°C.) Every time 
you press the HUMIDITY button, the humidity will change by 5%. (Humidity setting 
range is 40%~70%.)

•  In quick laundry mode, fine adjustment of room temperature and fan speed 

Press the 

 (STOP) button.

•  A short beep sounds and dehumidifying operation stops.

•  After the dehumidifying operation is stopped, the remote controller will display the 

operation mode that had been set before the 

(DEHUMIDIFY) button was 

pressed.

– 14 –

C

M

Y

CM

MY

CY

CMY

K

EN_14.ai   2010-7-8   10:21:37

EN_14.ai   2010-7-8   10:21:37