Справочник Пользователя для D-Link DCS5020L

Select this connection if you have a DHCP server running on your network 

and would like a dynamic IP address to be assigned to your camera 

automatically. 

Select this connection type if your Internet Service Provider (ISP) or 

network administrator has provided you with a static or fixed IP address 

and other network information for your camera. Click on the Static IP 

Address radio button to activate this method.

IP Address: The fixed IP address

Subnet Mask: The default value is “255.255.255.0.” Used to determine if 

the destination is the same subnet.

Default Gateway: The gateway used to forward data to destinations 

in a different subnet. Invalid gateway settings may cause the failure of 

transmissions to a different subnet.

Primary DNS: Primary domain name server that translates names to IP 

addresses.

Secondary DNS: Secondary domain name server to backup the Primary 

DNS.

If you need to connect to the Internet using a PPPoE connection, click on 

the PPPoE radio button and enter the username and password provided 

to you by your Internet Service Provider.

You may configure a second HTTP port that will allow you to connect to the 

camera via a standard web browser. The port can be set to a number other 

than the default TCP port of 80. A corresponding port must be opened on 

the router. For example, if the port is changed to 1010, users must type 

http://192.168.0.100:1010 instead of only “http://192.168.0.100”. 

Enable this setting to configure your camera as a UPnP device in your 

network. You can also enable UPnP port forwarding. 

Enable this setting to allow your camera to be discovered by the Bonjour 

service. You can also specify a Bonjour name for the device.

This section allows you to configure your network settings.