Справочник Пользователя для D-Link DCS5020L

Check this box to allow your camera to connect to your network wirelessly.

Enter the network name (SSID) of the wireless network you want to connect 

to. You can also click the Site Survey button below to choose an available 

network and fill in settings automatically.

If you are using Ad-Hoc as your connection mode, select the same channel 

that is being used by your wireless network.

Select the connection mode used by your wireless network. In most cases, 

you should select Infrastructure. Ad-Hoc is only used if your camera is 

directly connecting to another PC or device without the use of a router or 

access point.

Clicking this button will allow you to select an available wireless network to 

connect to, and will fill in the necessary settings for you.

Select the wireless security mode used by your wireless network. If you select 

WEP or WPA-PSK/WPA2-PSK, enter the password for your wireless network 

in the text box that appears.

This section allows you to set up and configure the wireless settings on your camera.