Справочник Пользователя для D-Link DCS5020L

Check this box to enable Extender Mode.

This shows the name of the Host wireless network that the camera is 

connected to and will extend.

Select an option:

•  Same as Host Wireless Network Name: Your extended network will 

use the same name and settings as your Host network. Your devices 

can use the same wireless information to connect to both the Host and 

Extended networks.

•  Create a New Wireless Network Name: This allows you to manually 

set the name and security used for the extended network. You will need 

to add this information for each wireless device that connects to this 

Extended network.

Set the maximum number of clients that are allowed to connect to the 

extended network.

If you choose to Create a New Wireless Network Name, you can set your 

wireless security options here.

•  None - No wireless encryption will be enabled. All data sent over the 

wireless connection could be viewed by third parties.

•  WEP - WEP is the simplest form of wireless encryption, and should only 

be used if you devices do not support WPA/WPA2 encryption. 

•  WPA/WPA2 - This is currently the most advanced encryption method. 

Enter a Pre-shared Key (password) in the text box provided. Wireless 

clients will require this password in order to access your extended 

network. 

This section allows you to setup and configure the Extender Mode feature of your camera. Extender Mode allows your camera to extend the range of 

your existing wireless network by repeating the signal it receives. You can choose to use the same network name and settings as your existing wireless 

network, or you can create a new one.