Справочник Пользователя для Pelco IS310-DW
C3429M-A (1/08)
7
Figure 5. Exploded Parts View
Figure 6. Camera Mounting Holes
ATTACH BASE
1. Release the base locking ring for access to the mounting holes.
2. Attach the base to an adapter plate or conduit adapter using the two 6-32 x 1.25-inch
tamper-resistant screws supplied with the adapters. Use the 1/8-inch hollow screwdriver bit
supplied with the Camclosure.
supplied with the Camclosure.
Mounting hardware for all other applications is not supplied.
WARNING: To prevent damage to the camera or lens, the camera must be installed in the
proper hole of the mounting bracket (refer to Figure 6). If the camera is not installed in the
correct hole, the window of the enclosure may be forced against the lens.
proper hole of the mounting bracket (refer to Figure 6). If the camera is not installed in the
correct hole, the window of the enclosure may be forced against the lens.
TAMPER-RESISTANT
SCREWS
CAMERA
MODULE
LOCK
WASHER
WASHER
PHILLIPS
PAN HEAD
SCREW
COVER
VENT
BASE
DO NOT USE
MOUNT CAMERA HERE