Справочник Пользователя для Mitsubishi Electronics 60/60S

4.  Parameters (User) 

4.2  Machining Parameters 

 

 

 

I-156 

 

8205  OT-CHECK-P 

This sets the coordinates of the (+) direction in the 
moveable range of the stored stroke limit II or the 
upper limit coordinates of the prohibited range of 
stored stroke limit IIB. 

±99999.999 (mm) 

8206  TOOL CHG. P 

Set the coordinates of the tool change position for 
G30. n (tool change position return).  
Set with coordinates in the basic machine 
coordinate system. 

±99999.999 (mm) 

8207 G76/87 IGNR 

(For M system only) 

Select the shift operation at G76 (fine boring) and 
G87 (back boring). 

0:  Shift effective  
1: No shift 

8208 G76/87 (–) 

(For M system only) 

Specifies the shift direction at G76 and G87. 

0:  Shift to (+) 

direction  

1:  Shift to (–) 

direction 

8209 G60 SHIFT 

(For M system only) 

Set the last positioning direction and distance for a 
G60 (uni-directional positioning) command. 

±99999.999 (mm) 

8210  OT INSIDE 

The stored stoke limit function to be set in #8204 
and #8205 prevents the machine from moving to the 
inside or outside of the specified range. 

0:  Inhibits outside area  

(select stored stroke limit II.) 

1:  Inhibits inside area 

 (select stored stroke limit II B.) 

0/1 

8211  MIRR. IMAGE 

Enable or disable the parameter mirror image 
function. 

0:  Disable 
1:  Enable 

0/1