Справочник Пользователя для Mitsubishi Electronics 60/60S

4.  Parameters (User) 

4.2  Machining Parameters 

 

 

 

I-158 

 

8316  BARRIER TYPE I 

(For L system only) 

Set the shape of the right chuck and tailstock 
barrier. 

0: No area 
1: Chuck 
2: Tailstock 

0/1/2 

8317  DELIV. AX. NAME 

(For L system only) 

When the right chuck and tailstock barrier is 
movable, set the name of the delivery axis. 
When using the 2-system method and the delivery 
axis is an axis in the other system, designate the 
system as 1A, 1B or 2A, 2B. If the system is not 
designated as A and B, the set system will be used.

A/B/.. 

(axis address)

1A/1B/.. 
2A/2B/.. 

(system designation)

0      (cancel)

8318  STOCK ANGLE (L) 

(For L system only) 

Set the angle for the left tailstock end section. 
The angle will be interpreted as 90° if there is no 
setting (0). 

0 to 180 (°) 
0: 90° default 

8319  STOCK ANGLE I 

(For L system only) 

Set the angle for the right tailstock end section. 
The angle will be interpreted as 90° if there is no 
setting (0). 

0 to 180 (°)