Справочник Пользователя для Intel IXD1110
IXD1110 Demo Board
Development Kit Manual
15
Document Number: 250807
Revision Number: 003
Revision Date: June 27, 2003
Revision Number: 003
Revision Date: June 27, 2003
5.0
IXF1110 Software
The IXF1110 software allows access to the following register blocks through the Graphical User
Interface (GUI) or the Serial Monitor (HyperTerminal) interface:
•
MAC Control
•
MAC RX Statistics
•
MAC TX Statistics
•
Global Status and Configuration
•
RX Block
•
TX Block
•
SPI4-2 Block
•
SerDes Block
•
GBIC Block
For additional information on all of the registers, please refer to the IXF1110 Datasheet or On-Line
Help.
Note: For help on using IXF1110 software, refer to the On-Line Help included in the software provided
with the IXD1110 demo board.
5.1
PC Requirements
The following is a list of the minimum PC requirements for installation of the IXF1110 software:
•
Intel
®
Pentium
®
II 400 MHz or equivalent
•
128 MB RAM
•
16 MB Video Card
•
Serial port
•
Microsoft* Windows 98, 2000 operating system
Note: Microsoft* Windows 95, ME, NT, and XP have not been tested.
•
Microsoft* Windows HyperTerminal
•
1024 x 768 minimum viewing resolution