Справочник Пользователя для Lucent Technologies R5SI

Issue 1

April 1997

Maintenance Commands and Trouble-Clearing Aids 

Page 8-676

test tone-clock 

Invalid carrier specified

If the cabinet entered is not within the valid range of cabinets or the cabinet is not 
administered, the following message will be displayed:

Cabinet number not assigned

If there is no tone/clock board at the specified location, one of the following 
messages will be displayed:

Board not inserted

Board not assigned

If the specified cabinet carrier location is that of a switch node, the following 
message will be displayed:

Switch Node carrier specified; invalid command for SN carrier

If the cabinet carrier location entered is that of an EPN that is not available, the 
following message will be displayed:

EPN is not available

If the command entered is in conflict with another currently executing command, 
then a message will be displayed showing the login id of the conflicting user and 
the conflicting command. The message is as follows:

’login id’:’command’ has a command conflict

If during the execution of a command a resource problem occurs that requires 
the user to restart the command, then the following message will be displayed:

Command resources busy; Press CANCEL to clear, and then resubmit

If all of the available maintenance resources are currently in use, then the 
following message will be displayed:

All maintenance resources busy; try again later

The responses will be displayed on a test-by-test basis with one line of data 
displayed for each test result.

Port

The tone clock circuit pack maintenance object will only display 
the cabinet-carrier location.

Maintenance Name

The maintenance objects being tested is TONE-BD, TONE-PT 
and TDM-CLK.

Alt. Name

Not applicable.