Справочник Пользователя для Barco 26-0503000-00
18
MatrixPRO • 8x8 DVI Router • User’s Guide
2. Hardware Orientation
MatrixPRO 8x8 DVI Router Front Panel
j~íêáñmol=UñU=asf=oçìíÉê=cêçåí=m~åÉä
The figure below illustrates the MatrixPRO 8x8 DVI Router front panel:
Figure 2-1. MatrixPRO 8x8 DVI Router Front Panel
Following are descriptions of each front panel control feature:
1)
Display Section
The Display Section includes the display, the ADJUST knob and two “menu
navigation” buttons. Refer to the “
navigation” buttons. Refer to the “
” heading on page 20 for
complete details.
2) Input
Selection
Section
On the top row at the right-side of the front panel, eight input (crosspoint) selection
buttons are provided on the top row. Routing is performed as follows:
buttons are provided on the top row. Routing is performed as follows:
~
Select an output, select an input, press TAKE.
In Chapter 4, refer to the “
” section on page 48 for details.
3) Output
Selection
Section
On the bottom row at the right-side of the front panel, eight output (crosspoint)
selection buttons are provided on the bottom row. In Chapter 4, refer to the
“
selection buttons are provided on the bottom row. In Chapter 4, refer to the
“
4) TEST PAT Button
The TEST PAT button functions as a ninth input, enabling you to route a selected
test pattern to one or more outputs. When pressed, the button lights and the
system pends the test pattern route. Test patterns are pre-selected using the Test
Pattern Menu. Patterns include H ramp, V ramp, 100% color bars, 75% color
bars, grids, burst, grey field, white field, black field, and grey steps. In Chapter 4,
refer to the “
test pattern to one or more outputs. When pressed, the button lights and the
system pends the test pattern route. Test patterns are pre-selected using the Test
Pattern Menu. Patterns include H ramp, V ramp, 100% color bars, 75% color
bars, grids, burst, grey field, white field, black field, and grey steps. In Chapter 4,
refer to the “
” section on page 50 for details.
Visibly yours
SEL
ESC
ADJUST
TM
MatrixPRO
MP 8x8 DVI
> Setup
> Setup
Status
EDID Setup
EDID Setup
>>
>>
>>
>>
>>
TAKE
OUTPUT
INPUT
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
TEST
PAT
RGB
MUTE
2
1
4
5
3
6
1)
Display Section
4)
2)
Input Selection Section
5)
3)
Output Selection Section
6)
TAKE Button