Справочник Пользователя для National Instruments NI PXIe-1065

© National Instruments Corporation

This chapter describes basic maintenance procedures you can perform on 
the NI PXIe-1065 chassis.

Disconnect the power cable prior to servicing a NI PXIe-1065 chassis.

Clean dust from the chassis exterior (and interior) as needed, based on the 
operating environment. Periodic cleaning increases reliability.

The information in this section is designed for use by qualified service 
personnel. Read the Read Me First: Safety and Radio-Frequency 
Interference document included with your kit before attempting any 
procedures in this chapter.

Many components within the chassis are susceptible to static discharge damage. 

Service the chassis only in a static-free environment. Observe standard handling 
precautions for static-sensitive devices while servicing the chassis. Always wear a 
grounded wrist strap or equivalent while servicing the chassis.

Cleaning procedures consist of exterior and interior cleaning of the chassis. 
Refer to your module user documentation for information on cleaning the 
individual CompactPCI or PXI Express modules.

Always disconnect the AC power cable before cleaning or servicing the chassis.

Use a dry, low-velocity stream of air to clean the interior of the chassis. 
Use a soft-bristle brush for cleaning around components.