Справочник Пользователя для IBM EtherLink XL

The dialog box confirms that the 3C905B-TX adapter is 
working properly. If a yellow exclamation point or a red X 
appears next to the adapter name, go to “Frequently Asked 
Questions” in Appendix B to troubleshoot the adapter.

7 Click Cancel to leave each dialog box and return to 

To install the network driver in a PC running Microsoft 
Windows 98, insert EtherDisk Diskette #2 when the 
Update Device Driver wizard starts and prompts you for 
a diskette or CD.

Do not insert EtherDisk Diskette #1, because the 
installation will be unsuccessful.

Continue with the installation by following the prompts on 
the screen. For instructions, follow the Windows 95 
installation steps on page 3-1 of this chapter.

To verify that the network driver was successfully installed 
in a PC running Windows 98:

1 From the Windows Start menu, select Settings, and 

then select Control Panel.

2 Double-click the System icon, and then select the 

3 Double-click Network adapters and make sure that the 

If a red X appears next to the name of the adapter, the 
installation was not successful. If this occurs, verify that the 
adapter is not disabled by following these steps:

a Double-click the name of the adapter.

b Select the General tab.

c Make sure that Disable in this hardware profile is not 

selected.