Справочник Пользователя для IBM EtherLink XL

C

HAPTER

 3: I

NSTALLING

 

THE

 N

ETWORK 

D

RIVER

If the adapter is not disabled and a red X still appears next to 
the name of the adapter, update the driver by following 
these steps:

a Double-click the name of the adapter.

b Select the Driver tab, and then click the Update Driver 

button. 

c Insert EtherDisk Diskette #2 when prompted for a disk.

Continue with the installation by following the prompts 
on the screen.

If a yellow exclamation point (!) appears next to the name of 
the adapter, the installation is not complete. See Appendix B 
for troubleshooting help.

If you are upgrading a PC from Windows 95 to Windows 98 
that already has an EtherLink or Fast EtherLink XL (3C90xB) 
adapter installed, you may have to update the driver in the 
Device Manager using EtherDisk Diskette #2.

Follow the instructions in the previous section, “Verifying 
Successful Installation Under Windows 98,” to determine 
if you have to update the driver.

This section describes how to install the network driver in a 
PC running Windows NT versions 4.0 or 3.51.

Do not use the AutoLink software to install the driver if you 
are running Windows NT. 

Before you begin, obtain EtherDisk Diskette #2 and 
Windows NT installation files (on hard disk, diskettes, 
or CD).