Справочник Пользователя для IBM EtherLink XL
Windows NT
3-7
If Windows NT networking is not installed, you may also
need the following information from your MIS department:
need the following information from your MIS department:
■
Whether you are on a LAN or are connecting to one
through a modem
through a modem
■
Protocol used in the Microsoft Windows Network
(typically TCP/IP or NetBEUI)
(typically TCP/IP or NetBEUI)
■
Name of the Windows NT server domain or workgroup
you belong to
you belong to
■
IP address if you are not using DHCP
Windows NT Version 4.0
If you already have the 3C905B-TX network driver and
want to update it, follow the instructions provided in the
next section.
want to update it, follow the instructions provided in the
next section.
Updating the Network Driver
To update the driver, follow these steps:
To update the driver, follow these steps:
1 Install the 3C905B-TX adapter and connect it to the
2 Restart the PC and start Windows NT.
3 In the Control Panel, double-click Network.
4 In the Network window, select the Adapter tab.
5 Select 3Com EtherLink XL NIC.
6 Click Update.
7 Insert EtherDisk Diskette #2.
The driver is updated.
Installing the Network Driver
Follow these steps to install the network driver in a PC
running Windows NT version 4.0:
Follow these steps to install the network driver in a PC
running Windows NT version 4.0:
1 Install the 3C905B-TX adapter and connect it to the
2 Restart the PC and start Windows NT.
3 In the Control Panel, double-click Network.
4 In the Network window, select the Adapter tab.