Справочник Пользователя для Enterasys Networks X16-C
Matrix X16-C Chassis Installation Guide 3-1
3
Matrix X16-C Chassis Setup
This chapter describes the following:
Required Tools
Installation equipment needed includes:
•
Box cutter
•
Phillips screwdriver
•
Flat blade screwdriver
A box cutter is required to cut the shipping straps. A Phillips screwdriver is needed to install the
unit in a 19‐inch (48.26‐centimeter) equipment rack and to install the optional Cable Management
Kit (refer to “
unit in a 19‐inch (48.26‐centimeter) equipment rack and to install the optional Cable Management
Kit (refer to “
” on page 3‐37 for more information). A flat blade
must be followed to install the Matrix X16‐C chassis.
For information about:
Refer to page ...
Electrical Hazard: Only qualified personnel should install or service this unit.
Riesgo Eléctrico: Solamente personal calificado debe realizar procedimientos de instalacion.
Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und qualifiziertes
Personal vorgenommen werden.
Personal vorgenommen werden.