Справочник Пользователя для Fortinet Version 3.0
Configuration and operating procedures
Configuring FortiBridge alerts
FortiBridge Version 3.0 Administration Guide
09-30000-0163-20061109
09-30000-0163-20061109
41
FortiBridge alert email
If you set the probe action on failure to alertmail, you can configure alert email
so that the FortiBridge unit sends an email message to up to three email
addresses if the FortiBridge unit detects a failure. The alert email informs the
recipient that a FortiGate unit has failed, includes the protocol for which the failure
was detected, and includes the serial number of the FortiGate unit that failed.
so that the FortiBridge unit sends an email message to up to three email
addresses if the FortiBridge unit detects a failure. The alert email informs the
recipient that a FortiGate unit has failed, includes the protocol for which the failure
was detected, and includes the serial number of the FortiGate unit that failed.
Only the first probe to detect a failure triggers the actions on failure. So, even if
multiple probes are configured, when a failure is detected, the FortiBridge unit
sends one alert email.
multiple probes are configured, when a failure is detected, the FortiBridge unit
sends one alert email.
Figure 16: Sample FortiBridge alert email message
FortiBridge detect FortiGate failure
Time: Tue Feb 1 19:58:46 2005
failed protocol: http
failed FortiGate serial number: FGT8002803923050
To configure alert email
Configuring FortiBridge alert email is similar to configuring FortiGate alert email.
1
Log into the CLI.
2
Configure alert email. Enter:
config alertemail setting
set server mail.myorg.com
set username user@company.com
set password PassWORD
set mailto1 user@company.com
set mailto1 user2@company.co.uk
set mailto1 user3@company.com
end
FortiBridge syslog
If you set the probe action on failure to syslog, you can configure FortiBridge
syslog so that the FortiBridge unit sends a syslog message to one syslog server if
the FortiBridge unit detects a failure. The message informs the recipient that a
FortiGate unit has failed, includes the protocol for which the failure was detected,
and includes the serial number of the FortiGate unit that failed.
syslog so that the FortiBridge unit sends a syslog message to one syslog server if
the FortiBridge unit detects a failure. The message informs the recipient that a
FortiGate unit has failed, includes the protocol for which the failure was detected,
and includes the serial number of the FortiGate unit that failed.
Only the first probe to detect a failure triggers the actions on failure. So, even if
multiple probes are configured, when a failure is detected, the FortiBridge unit
sends one message.
multiple probes are configured, when a failure is detected, the FortiBridge unit
sends one message.
Figure 17: Sample FortiBridge syslog messages
02-01-2005 18:22:50 Local7.Alert 172.20.120.13 date=2005-02-
01 time=15:28:22 device_id= log_id=0100020001 type=event
subtype=system pri=alert msg="FortiBridge detect FortiGate
failure: [failed time: Tue Feb 1 15:28:22 2005][failed
protocol: http] [failed FortiGate serial number:
FGT8002803923050]"