Справочник Пользователя для Apple 220-240 V

Paper Recommendations

Loading Paper

• Do not use ink-jet printer paper because it may stick to the fusing unit and cause a paper misfeed.
• When printing on OHP transparencies that have a print side, load them with the print side over on

the bypass tray. Not taking this precaution may cause them to stick to the fusing unit and cause
misfeeds.

• Set the paper as described below

• Tray 1: Print side facing down
• Bypass Tray: Print side facing up
• Paper Feed Unit (Tray 2, Tray 3): Print side facing down

• Print quality cannot be guaranteed if paper other than the ones recommended is used. For more

information about recommended paper, contact your sales or service representative.

• Do not use paper that has already been printed onto by other printers.

Storing Paper

• Paper should always be stored properly. Improperly stored paper might result in poor print quality,

paper misfeeds, or printer damage. Recommendations are as follows:

• Avoid storing paper in humid areas.
• Avoid exposing paper to direct sunlight.
• Store on a flat surface.

• Keep paper in the package in which the paper came.

Types of Paper and Other Media

Plain Paper

Paper thickness

60 - 130 g/m

(16 - 34 lb.)

Printer setup

Make the following settings using the control panel:

• Press the [Menu] key, select [Paper Input], and then select

[Plain Paper] for the selected tray's paper type.

5. Paper and Other Media