Справочник Пользователя для Apple 220-240 V

Printer driver setup

Click [Plain] or [Plain/Recycled] in the "Paper type:" list.

Enabled paper feeding tray

Any input tray can be used.

Number of sheets that can be set

Tray 1: 500
Tray 2, Tray 3 (Paper Feed Unit TK1030): 500
Bypass Tray: 100

• Make sure paper is not stacked higher than the upper limit

mark ( ) inside the tray. Make sure paper is not stacked
higher than the paper guides inside the bypass tray.

Both-sided printing

Possible

Additional cautions

When printing on 91 - 130 g/m

2

 paper, print speed is slightly

slower to when printing on paper of 60 - 91 g/m

2

.

Letterhead

Printer setup

Make the following settings using the control panel:

• Press the [Menu] key, select [Paper Input], and then select

[Letterhead] for the selected tray's paper type.

Printer driver setup

Click [Letterhead] in the "Paper type:" list.

Both-sided printing

Possible

Thick Paper

Paper thickness

130 - 162 g/m

2

 (8 - 43 lb.)

Printer setup

Make the following settings using the control panel:

• Press the [Menu] key, select [Paper Input], and then select

[Thick Paper] for the selected tray's paper type.

Printer driver setup

Click [Thick] in the "Paper type:" list.

Enabled paper feeding tray

Any input tray can be used.

• Make sure paper is not stacked higher than the upper limit

mark ( ) inside the tray. Make sure paper is not stacked
higher than the paper guides inside the bypass tray.

Paper Recommendations

79

5