Справочник Пользователя для Apple 220-240 V

Both-sided printing

Not possible

Additional cautions

Print speed is slightly slower than when using plain paper.

OHP transparencies

Printer setup

Make the following settings using the control panel:

• Press the [Menu] key, select [Paper Input], and then select

[Transparency] for the bypass tray's paper type.

Printer driver setup

Click [OHP Transparency] in the "Paper type:" list.

Enabled paper feeding tray

This paper type can be printed only from the bypass tray.

Number of sheets that can be set

Bypass Tray: 20

• Make sure paper is not stacked higher than the paper guides

inside the bypass tray.

Both-sided printing

Not possible

Additional cautions

• Print speed for OHP transparencies is slower than for plain

paper.

• Depending on the setting made for mode switching, the

printer goes into standby mode 30 or 40 seconds after
receiving a job.

• We recommend you use a 4000 ANSI lumen or brighter

overhead projector to project OHP transparencies.

• When printing on OHP transparencies that have a print side,

load them with the print side facing up on the bypass tray.

Envelopes

Printer setup

Make the following settings using the control panel:

• Press the [Menu] key, select [Paper Input], and then select

[Thick Paper] for the selected tray's paper type.

• Paper type settings made using the printer driver have

priority over paper type settings made using the control
panel settings.

Printer driver setup

Click [Thick] in the "Paper Type:" list.

5. Paper and Other Media