Справочник Пользователя для Mitsubishi Electronics CR751-D
2-61
About Overhaul
２ Robot arm
2.8 About Overhaul
Robots which have been in operation for an extended period of time can suffer from wear and other forms of
deterioration. In regard to such robots, we define overhaul as an operation to replace parts running out of speci
deterioration. In regard to such robots, we define overhaul as an operation to replace parts running out of speci
-
fied service life or other parts which have been damaged, so that the robots may be put back in shape for contin
-
ued use. Overhaul interval for robots presumably varies with their operating conditions and thus with the degree of
the equipment's wear and loss of performance. As a rule of thumb, however, it is recommended that overhaul be
carried out before the total amount of servo-on time reaches the predetermined levels (24,000 hours for the robot
body and 36,000 hours for the controller). (See
the equipment's wear and loss of performance. As a rule of thumb, however, it is recommended that overhaul be
carried out before the total amount of servo-on time reaches the predetermined levels (24,000 hours for the robot
body and 36,000 hours for the controller). (See
.) For specific information about parts to be replaced and
timing of overhaul, contact your local service representative.
Fig.2-37 ： Periodic inspection/overhaul periods
Shipment
Failure rate λ
Predetermined time period
If overhaul is performed
Servo-on time
If overhaul is not performed
Periodic inspection
Over
-
haul