Справочник Пользователя для Intellinet Network Solutions 521796

TROUBLESHOOTING

Problem
Unable to

operate USB-ready

Sun server.

Keyboard error on

boot.
Alphabets on the

TFT LCD display

are blurred or

have shadows.
Master/slave does

not work.

Keyboard strokes

are shifted.

The up/down

arrow keys don’t

work in Manual

Scan.

The OSD menu

is not in the proper

position.

Remedial Actions
Use only the hybrid PS/2 + USB KVM

module.
Bring up the OSD menu, move the light

bar to the port, press F5 to set the Sun

mark on.
Make sure the keyboard cables are well

seated.
Set the VGA resolution of the computers

to 1024 x 768 with “Large Font” for

the best performance.

Make sure slave’s console is connected

to the master’s PC-1 – PC-8 port. Only

PS/2 ports can be used for cascading.
Press and hold the “1” and “2” push

buttons to initiate K/M reset.
Turn off any/all power to the slave

(unplug all cables) before connecting it

to the master.
Press both Shift keys.

Turn the computers on.
Press any other key to abort the

Manual Scan mode.

Set the proper Scan Type in the OSD

and determine which PCs are N-

selected.

Use F4:More\Position to select “UL”

(upper-left) or “UR” (upper-right). The

OSD menu may appear near the middle

of the screen when “LL” (lower-left) or

“LR” (lower-right) is selected.

Possible Cause
Incorrect KVM

module.

Loose keyboard

connection.
Improper

resolution

settings.

Improper

installation

procedures.

The computer

was in shifted

state when last

switched.
All PCs are off,

or only one PC is

turned on. The

Scan mode works

for powered-on

computers only.
Scan Type is N-

selected, but no

PC is N-selected

in the OSD.
The resolution of

the menu is ﬁxed;

its size varies as

computer VGA

resolution changes.