Справочник Пользователя для Echo HC-235

Level 1.

Tools required:    Clean rag, 25 or 50 mm (1 or 2 in.) cleaning brush

Parts required:    20W Engine Oil (lubrication), 50-50 mixture of 

kerosene and 20W oil (cleaning).

Hedge Clipper blades are very sharp.  Touching them may lead to 

severe personal injury.  Avoid touching blades whenever possible, 

and always wear gloves to protect hands. 

1.  Move stop switch to stop position.

2.  Disconnect spark plug wire from spark plug.

3.  Brush loose debris from blade and coat both sides of blade with the 

50-50 cleaning mixture.

4.  Allow cleaning mixture to soften the remaining gummy residue then 

wipe it from the blade.

5.  Apply clean oil to the entire length of the blade.  Be certain the 

blade bolts are lubricated.

6.  Wipe excess oil from the blade before putting the unit back in ser-

vice.