Справочник Пользователя для Echo HC-235

Tools required:   (2) 10 mm Sockets and Extensions

Parts required:   None

Hedge clipper blades are very sharp.  Touching them may lead to 

severe personal injury.  Use a socket and extension when adjust-

ing blade bolts or blade locknuts in order to keep hands at a safe 

distance from sharp blades.  

Blades should only be removed and reinstalled by an Authorized 

ECHO Servicing Dealer, otherwise premature wear or internal 

damage may occur.

1.  Tighten blade bolts until snug, then loosen blade bolts 1/2 turn.  

2.  Hold blade bolts from turning using 10 mm socket, and tighten 

blade lock nuts with other 10 mm socket.

Locking ability of Hedge Clipper blade lock nuts will diminish 

each time they are removed. Replace if turning resistance is not felt 

when installing locknuts.