Справочник Пользователя для Echo HC-235

Tools required:    Flat file,  Screwdriver

Parts required:    None

Hedge Clipper blades are very sharp.  Touching them may lead to 

severe personal injury.  Avoid touching blades whenever possible, 

and always wear gloves to protect hands. 

1.  Disconnect spark plug wire.

2.  Slide blades to allow file clearance using slots on bottom of blades. 

Do not pry against cutting edges.

3.  Follow the original shape, and file each cutting edge carefully to 

avoid damage to adjacent teeth. Maintain 6 mm (.25 in.) radius at 

base of each tooth.

If a power grinder is used, DO NOT allow blade to over heat.

4.  Lubricate blades.  See "Lubrication".

5.  Connect spark plug wire.

Level 1.

Tools required:  Grease Gun P/N 91016, Clean rag

Parts required:    POWER BLENDX

TM

 8 oz. (P/N 91014) or Lithium 

Base Grease

1.  Clean all loose debris from gear box.

2.  Remove plug (A) and check level of grease.

3.  Add grease if necessary. DO NOT over-fill.