Справочник Пользователя для Sony LF-X1

F:\Joutou\#4090332_Sony_LF-X\4103221121up\4103221121\4103221121LF-
X1\00GB05C01-WW.fm

LocationFreeTV

4-103-221-12(1)

59

Select [Back].
The [Base station] window reappears.

Select [Settings], then select [Exit].

Once the base station is set up to allow additional 
monitors, set up the monitors to connect to the 
base station via the Internet.
Perform these settings on monitors to be used 
from outside the home.

1 page 56), and 

set up to connect to the base station via the 
Internet.

If the IP address or domain name and port number for 
the base station you want to register are not input 
correctly, you cannot proceed with registration.

Register the monitors that will connect to the base 
station via the Internet.

Switch the connection type for the monitor to [On the 
go-Wireless] or [On the go-Wired LAN] depending on 
the connection used for On the go to start NetAV.

Display the [Settings] window, and select 
[Monitor].
The [Monitor] window appears.

Select [NetAV Settings].
The [NetAV Settings] window appears.

Select [Registration for Binding].
The [Registration for Binding] window 
appears.

Configure the following settings and select 
[Start].

1

Enter the [Password for registration] that 
was created in step 4 of “Setting up for 
additional monitors” (

2

Enter the name of the monitor being 
registered to the base station.
You can register any name.

3

[Start] button

A confirmation message appears.

Select [OK].

Select [Back].
The [Monitor] window reappears.

Select [Settings], then [Exit].