Справочник Пользователя для Sony LF-X1

F:\Joutou\#4090332_Sony_LF-X\4103221121up\4103221121\4103221121LF-
X1\00GB05C01-WW.fm

LocationFreeTV

4-103-221-12(1)

60

Refer to the illustration in “Registering Other 
Monitors” (

• Only one monitor can enjoy video with the base 

station at once. In the case when the two 
monitors B and C are registered to the base 
station A, monitor B or C cannot establish a 
NetAV session with the base station A while 
the monitor A is receiving video from base 
station A.

• If you have configured the base station A to 

enable [Allow AV interception by registered 
monitors] in the [Register other monitors] 
setting, monitor B or C can start NetAV while 
the monitor A is receiving video from the base 
station A.

• When your monitor A cannot receive video 

because monitor B or C is in a NetAV session 
with the base station A, you can see the 
indicator 

 at the top of the screen. If you 

press [GetAV] button in such a case, the NetAV 
session between monitor B or C and the base 
station A will be disconnected and your 
monitor A can receive video from the base 
station A.

This chapter describes how to start NetAV and 
some functions for NetAV. Follow the procedure 
on page 49 to 51 to use NetAV in the “On the go-
Wireless mode”.

You cannot use NetAV while away from home if the 
base station in your home is turned off. Make sure to 
turn on the base station.

Using a LAN cable, connect the LAN port on the 
monitor to the Ethernet jack at the place you are 
visiting.

◆For the LF-X1

◆For the LF-X5