Руководство Пользователя для Netopia 3220-h

Using the Command Line Interface

Cayman 3220-H User’s Guide

December 2000

If a command is ambiguous or miskeyed, the CLI prompts you to 
enter additional information. For example, you must specify which 
virtual circuit you are configuring when you are setting up a Cayman 
3220-H.

Dogzilla (ip)>> ip-ppp

  ip-ppp (?) [vcc1 | vcc2 | vcc7 | vcc8]: vcc1

Dogzilla (ip ip-ppp [vcc1])>>

You can use the 

view 

command to display the current CONFIG 

settings for your Cayman 3220-H. If you enter the 

view 

command at 

the top level of the CONFIG hierarchy, the CLI displays the settings 
for all enabled functions. If you enter the 

view

 command at an 

intermediate node, you see settings for that node and its subnodes.

The Cayman 3220-H command line interface includes a step mode to 
automate the process of entering configuration settings. When you 
use the CONFIG step mode, the command line interface prompts 
you for all required and optional information. You can then enter the 
configuration values appropriate for your site without having to 
enter complete CLI commands.

When you are in step mode, the command line interface prompts 
you to enter required and optional settings. If a setting has a default 
value or a current setting, the command line interface displays the 
default value for the command in parentheses. If a command has a 
limited number of acceptable values, those values are presented in 
brackets, with each value separated by a vertical line. For example, 
the following CLI step command indicates that the default value is 

off

 and that valid entries are limited to 

on

 and 

off

.

Numbers

Enter numbers as integers.

IP addresses

Enter IP addresses in dotted decimal notation (0 
to 255).