Справочное Руководство для Netopia r6100

You configure the MultiNAT features through the console menu:

■

For a simple 1-to-many NAT configuration (classic NAT), use the 

, 

described below.

■

For the more advanced features, such as ser ver lists and dynamic NAT, follow the instructions in:

■

■

The screen below is an example. Depending on the type of router you are using, fields displayed in this screen 
may var y.

The Local WAN IP Address is used to configure a NAT public address range consisting of the Local WAN IP 
Address and all its por ts. The public address map list is named Easy-PAT List and the por t map list is named 
Easy-Ser vers.

When you exit this screen the two map lists, Easy-PAT List and Easy-Ser vers, are created by default and NAT 
configuration becomes effective.This will map all your private addresses (0.0.0.0 through 255.255.255.255) to 
your public address. These map lists are bound to the Easy Setup Profile. See 

.

This is all you need to do if you want to continue to use a single PAT, or 1-to-many, NAT configuration.

                   Connection Profile 1: Easy Setup Profile

         Number to Dial:                    2125551212

         Address Translation Enabled:       Yes
         IP Addressing...                   Unnumbered

         Local WAN IP Address:              206.1.1.6
         Local WAN IP Mask:                 0.0.0.0
         Remote IP Address:                 127.0.0.2
         Remote IP Mask:                    255.255.255.255

         PPP Authentication...              PAP
         Send User Name:                    tony
         Send Password:                     *****

         PREVIOUS SCREEN                    NEXT SCREEN

Enter the directory number for the remote network connection.
Enter basic information about your WAN connection with this screen.