Руководство Пользователя для Maytag mhwe300v

Use this cycle to wash no-iron fabrics and garments labeled “Permanent Press” or “Wrinkle 
Free” or that indicate using a “Gentle” cycle on the care label. This cycle combines low-speed 
tumbling and low-speed spin to help reduce wrinkling. 

Use this cycle to wash small loads of lightly soiled garments that are needed in a hurry. This 
cycle combines fast-speed tumbling, a shortened wash time, and extra high speed spin to 
shorten drying time.

Cycles certified by NSF International, an independent, third party testing and certification 
organization are those with the sanitize temperature selection available. The certification 
verified that these cycles reduce 99.9% of bacteria typically found on clothing, bedding,  
and towels. There is no carryover of bacteria between loads after the cycle is complete.

        Certified to Sanitize

 

Use this cycle to clean heavily soiled, colorfast fabrics. This cycle combines a super hot water 
temperature and fast-speed tumbling to help ensure the removal of heavy soils and stains. It is 
recommended that you set your hot water heater to 120°F (49°C) to ensure proper 
performance during this cycle. Extra high speed spin helps shorten drying time. Only Sanitary 
cycle has been designed to meet the requirements of NSF Protocol P172 for Sanitizing 
Efficacy.  

Use this cycle once a month to keep the inside of your washer fresh and clean. This cycle uses 
a higher water level in combination with AFFRESH

TM

 washer cleaner or bleach and steam, to 

thoroughly clean the inside of your washer. This cycle should not be interrupted. See 
Cleaning Your Washer in the Washer Care section.
IMPORTANT: Do not place garments in the washer during the Clean Washer cycle.

Use this cycle to get a rinse and spin only. This cycle combines fast-speed tumbling and extra 
high speed spin. If desired, you can reduce the spin speed by selecting the speed you want 
from the Spin Speed modifier.
A Rinse & Spin cycle is useful for:

„

Loads that need rinsing only, like swimsuits. 

NOTE: For more delicate loads, when using a Rinse & Spin cycle to rinse swimwear, 
change the Speed Spin Modifier setting to Medium or Low to avoid fabric stress.

„

Adding fabric softener to a load.

Use this cycle to drain your washer or to drain and spin your wash load. The spin speed is 
preset to extra high. If desired, you can reduce the spin speed by selecting the speed you want 
from the Spin Speed modifier.
NOTE: Loads of synthetics, delicate fabrics, hand washables, and washable woolens should 
be drained with no spin or low spin speed to avoid fabric stress.

Each cycle has a preset Soil Level (cycle time), Water Temperature, and Spin Speed. The 
preset settings provide the recommended fabric care for the selected cycle. See chart.

Soil Level 
(cycle time)

Normal 
(1:15)

Hot/Cold

Extra High

Heavy 
(1:20)

Hot/Cold

Extra High

Normal 
(0:50)

Warm/Cold

High

Normal 
(0:40)

Cold/Cold

Low

Light 
(0:30)

Warm/Cold

Extra High

Normal 
(1:50)

Hot/Cold

Extra High

N/A
(0:50)

N/A

N/A

N/A 
(0:20)

Cold/Cold

Extra High

N/A 
(0:11)

N/A

Extra High

Press the selector of each setting until the desired setting illuminates.

As with any new product, you will hear sounds that you are not accustomed to. You may hear 
various sounds when the door is locked and unlocked, and during the washing, rinsing, and 
spinning process. Between changes in wash actions, there will be momentary pauses. You 
will hear water spraying and splashing during the wash and rinse cycles. These new sounds 
and pauses are part of normal washer operation.