Руководство Пользователя для Maytag mhwe300v

You can customize your wash by adding options to your cycle selections. You can add or 
change an option after starting a cycle anytime before the selected option begins. Not all 
options are available with all cycles. 

„

See the “Laundry Guide” for an overview of possible options for each Wash Cycle 
selection.

„

You can select more than one option for a cycle. Some options cannot be added to some 
cycles; for example, Soak Time cannot be added to the Quick Wash cycle.

„

If an option is available with a selected cycle, the light for that option will illuminate 
when selected.

„

If an option is unavailable with a selected cycle, there will be a short tone, and the light 
for that option will not illuminate when selected.

Use this option to turn the buzzer indicating the end of the cycle on or off. 

Use this option to add an additional spin to any cycle to improve drying times for some heavy 
fabrics by reducing excess water, which may save energy.

A second rinse can be used to aid in the removal of detergent or bleach residue from 
garments. This option provides an additional rinse with the same water temperature as the 
normal rinse. This is the default rinse setting for the Whitest Whites cycle. 

Use the Soak Time option to remove small spots or stains on fabrics. This option provides up 
to a 30-minute soak time prior to the start of the selected cycle. 
Using the Soak time option

The soak time option provides a soak time with warm or cold water followed by drain.

1. Select the desired cycle.
2. Choose the desired temperature.
3. Select soak.

Select and hold START/PAUSE (approximately 1 second). 

Preset cycle settings of Soil Level (cycle time), Wash Temperature, and Spin Speed can be 
changed. You can change these settings by using modifiers. Modifiers can be changed before 
or during the cycle until that part of the cycle starts. Not all modifiers are available with all 
cycles and options. 

„

To change Soil Level (cycle time), select the SOIL LEVEL button until the desired setting 
illuminates.

„

To change the water temperature, select the WASH TEMP button until the desired setting 
illuminates.

„

To change the spin speed, select the SPIN SPEED button until the desired setting 
illuminates.

Select a water temperature based on the type of load you are washing. Use the warmest wash 

water safe for fabrics. Follow garment label instructions.
Warm rinses leave the loads drier than cold rinses. Warm rinses increase wrinkling. In cold 

climates, a warm rinse makes the load more comfortable to handle. Cold rinses save energy.

„

In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well.  
Soils may be difficult to remove.  

Sturdy colorfast fabrics
Whites and pastels
Heavy soils

Bright colors
Moderate to light soils

Colors that bleed or fade
Light soils

In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well.  
Soils may be difficult to remove. 

The automatic temperature control electronically senses and maintains a uniform water 
temperature. Automatic temperature control regulates incoming hot and cold water. 
Automatic temperature control is automatically turned On when a cycle is selected.  
See “Preset Cycle Settings” in Cycles.

„

Automatic temperature control works for all wash and rinse temperature settings.