Руководство Пользователя для Maytag mhwe300v

1. Select START/PAUSE once.
2. Select the desired OPTIONS or MODIFIERS.
3. Select START/PAUSE (for approximately 1 second) to continue the cycle.
To drain the washer manually

1. Select START/PAUSE once.
2. Select DRAIN/SPIN.
3. Select START/PAUSE (for approximately 1 second) to begin the drain.
4. When the spin is complete, the door unlocks. Items can be removed from the washer.

This indicator shows which portion of the cycle the washer is operating and the estimated 
time remaining. It also indicates when you can add an additional item to the wash cycle  
and when the controls are locked.

This washer allows an 8-minute period in which other garments may be added to the load. 
You can add items to the washer if the status indicator shows Add Clothes. 
To add items

1. Select START/PAUSE once. The washer door unlocks, and items can be added.
2. To continue the cycle, close the door and select START/PAUSE (for approximately 

1 second).

3. To unlock the door after the Add Clothes period, press POWER/CANCEL twice.  

This will cancel the Wash Cycle.

The cycle done indicator stays on for 60 minutes, until the door of the washer is opened,  
or the Power/Cancel button is pressed. 

The Control Lock avoids unintended use of the washer. You can also use the control lock 
feature to avoid unintended cycle or option changes during a cycle. When Control Lock light 
is lit during a cycle, all buttons are disabled except for the Control Lock, Power/Cancel, and 
Start/Pause buttons. 
To lock the controls 
Select and hold CONTROL LOCK button for 3 seconds.

The CONTROL LOCK status light illuminates. 

To unlock the controls 
Select and hold CONTROL LOCK for 3 seconds until the Control Lock status light turns off. 

When the status light illuminates, the door is locked.

The cycle time varies automatically based on your water pressure, water temperature, 
detergent, and clothes load. The cycle time will be extended if oversudsing occurs or the load 
is unbalanced. The SUDs routine removes extra suds and assures proper rinsing of your 
clothes. During the unbalance routine, the time displayed may pause until this activity is 
complete, then resume with the cycle. These routines may add up to a half-hour to the default 
cycle time.

Cycles can be selected by turning the Cycle control knob to the desired cycle. Each cycle  
is designed for different types of fabric and soil levels.

„

Each cycle has a preset Soil Level (cycle time), Water Temperature, and Spin Speed, and 
may have preset options. The preset settings provide the recommended fabric care for the 
selected cycle.

„

The preset settings can be changed anytime before START is pressed. Not all options and 
modifiers are available with all cycles. (To change settings after the cycle has started, press 
PAUSE once, then select the desired settings. Press START again to continue the cycle.)

This cycle is especially designed for cleaning loads of soiled white fabrics with the addition of 
bleach. Hot washing temperatures assure optimal bleach activity. An additional rinse provides 
optimal rinse performance to avoid chlorine residues on your laundry. This cycle combines 
high-speed tumbling, longer wash time, and fast-speed spin to shorten drying time.

Use this cycle to wash loads of sturdy, colorfast fabrics and heavily soiled garments. This cycle 
combines fast-speed tumbling, longer wash time, and extra high speed spin to shorten drying 
times. If the water temperature is lower than needed for this cycle, the heater will warm the 
water to the optimum temperature.

Use this cycle to wash normally soiled cottons and linens. This cycle combines medium-
speed tumbling and high-speed spin.