Руководство Пользователя для LXE mx3
Symbol Barcodes - Scanner Parameters – General
69
E-SW-SCANNERPG-L
Integrated Scanner Programming Guide
Check Parity
Scanner:
SE2223
Parameter Default Value:
Enable
Select whether or not the parity of received characters is checked. The type of parity used is
selectable through the Parity parameter.
selectable through the Parity parameter.
Check Parity
Check Parity
Do Not Check Parity
Do Not Check Parity
Decode Data Packet Format
Decode Data Packet Parameter Default Value Unpacketed
This parameter selects whether decoded data is transmitted in raw format (unpacketed), or transmitted
with the packet format as defined by the serial protocol.
with the packet format as defined by the serial protocol.
If the raw format is chosen, ACK/NAK handshaking is automatically disabled for decode data.
Set this parameter by scanning either of the following barcodes.
Send Raw Decode Data
Send Raw Decode Data
Send Packeted Decode
Data
Data
Send Packeted Decode