Краткое Руководство По Установке для Ricoh ap204
Making Printer Settings with the Operation Panel
100
7
❖
7. Parallel 2
You can specify the optional parallel interface timing setting. Normally it is
not necessary to change this setting.
• ACK inside
• ACK outside
• STB down
not necessary to change this setting.
• ACK inside
• ACK outside
• STB down
Note
❐ Do not use the “ACK outside” setting.
❖
8. Bi-direction
You can specify the printer response mode for status fetch requests when the
standard parallel interface is being used. Use the “Standard” setting when
you are experiencing problems while the printer is connected to another
manufacturer’s print box.
• Original Mode
• Standard
standard parallel interface is being used. Use the “Standard” setting when
you are experiencing problems while the printer is connected to another
manufacturer’s print box.
• Original Mode
• Standard
Note
❐ This setting is effective only for "Parallel 1".
❖
9. Printer Lang (Printer Language)
You can specify the printer language that is automatically set when the printer
is turned on.
• IPDL-C
• RPS
is turned on.
• IPDL-C
• RPS
❖
10. Language
You can specify the language of the text that appears on the panel display.
• English
• French
• German
• Italian
• Dutch
• Japanese
• English
• French
• German
• Italian
• Dutch
• Japanese
❖
32. IP Address - 39. Active Protocol
These items appear when an optional network interface board is installed in
the printer.
the printer.
Reference
❐
=> P.23 “Configuring the Printer for the Network with the Operation Panel”.