Краткое Руководство По Установке для Ricoh ap204
NetWare Configuration
42
3
Setting Up a Client Computer
This section describes how to set up a client computer when you use a NetWare
print server.
print server.
Note
❒ This section assumes that the client has NetWare client applications installed
and is correctly configured to communicate with a NetWare print server. If
not, install necessary applications before starting the setting up procedure.
not, install necessary applications before starting the setting up procedure.
Windows95/98
Follow these steps to setting up a Windows 95/98 client.
Preparation
Log in to the NetWare file server before starting the following procedure.
A
Install the printer driver of the printer you want to use as “Local printer”.
Reference
For more information on installing the printer driver, refer to the Operat-
ing Instructions of your printer.
ing Instructions of your printer.
Note
❒ Any port is selected during the installation, however, LPT1 is recommend-
ed.
B
Click
[Start]
, point to
[Settings]
, and then click
[Printers]
.
C
In the
[Printers]
window, select the icon of the printer you want to use by
clicking it.
D
On the
[File]
] menu, click
[Properties]
].
E
Click
[Details]
tab, and click
[Add Port]
.
F
Click
[Network]
and click
[Browse]
.
G
On the network tree, double-click the name of the computer used as the
print server.
The names of the printers attached to the network are displayed.
print server.
The names of the printers attached to the network are displayed.
H
Click the queue you want to print to highlight it, and click
[OK]
.
I
Click
[OK]
.
In the
[Print to the following port]
box, a network path to the printer appears.
J
Click
[OK]
to close the printer's property, and again, open it.