Краткое Руководство По Установке для Ricoh ap204
![Ricoh](https://files.manualsbrain.com/attachments/5d75c15ccccf2674dc37d8acfe0fae2e288880f8/common/fit/150/50/7e2e9af8081fa1a72a9fce0a1dbc35e689c173f116f15720716c2ad6d183/brand_logo.png)
Setting Up a Client Computer
43
3
K
Click the
[Printer Settings]
tab.
L
Remove the
'''' marks from the
[Form feed]
and the
[Enable banner]
check box-
es.
Note
❒ You should not check these boxes here, since they should be specified us-
ing the printer driver. If they are checked, the printer might not print cor-
rectly.
rectly.
When Using the PostScript Printer Driver
Follow these steps to set up for the PostScript Printer Driver
A Click the
A Click the
[PostScript]
tab.
B Click
[Advanced]
.
C Remove the '''' marks from the
[Send CTRL+D before job]
and the
[Send
CTRL+D after job]
check boxes.
M
Click
[OK]
to close the property.
Windows 3.1x
Follow these steps to setting up a Windows 3.1x client.
A
Install the printer driver of the printer you want to use as “Local printer”.
Reference
For more information on installing the printer driver, refer to the Operat-
ing Instructions of your printer.
ing Instructions of your printer.
B
Double-click the
[Printers]
icon of
[Control Panel]
.
C
In the
[Installed Printers]
box, select the printer driver you want to use by
clicking it, and then, click
[Connect]
.
D
In the
[Ports]
box, click
[LPT1]
to highlight it, and click
[Network]
.
The Network driver dialog appears.
E
In the
[Ports]
box, click
[LPT1]
to highlight it, and in the
[Resources]
box, click
the queue you want to print to highlight it.
Note
❒ You should log in to the print server in order to see the print queues.
F
Click
[Capture]
.
The specified queue is captured to the LPT1.