Краткое Руководство По Установке для Ricoh ap204
Remote Maintenance by Telnet (mshell)
69
6
Network Boot
Use the set command to configure a network boot.
msh> set
parameter {on | off}
“On” means active and “Off” means inactive.
Note
❒ When you use RARP+TFTP, BOOTP, DHCP, the server also needs to be con-
figured.
❒ DHCP takes precedence over all other settings.
Protocol
Use the set command to allow/prevent remote access for each protocol.
msh> set
protocol {up | down}
255.0.0.0
192.XXX.XXX.XXX
255.255.0.0
192.168.XXX.XXX
255.255.255.0
192.168. 15.XXX
255.255.255.255
192.168. 15. 16
Parameter
Configuration Method
ping
ARP+PING
tftp
RARP+TFTP
bootp
BOOTP
dhcp
DHCP
Protocol
appletalk
tcpip
netware
netbeui
lpr
ftp
rsh
diprint
web
“Up” means active and "Down” means inactive.
Access Control Mask
IP addresses that can access the printer