Инструкции По Установке для Nortel 100

30 Chapter 3 Installing the Instant Internet software

209226-B

  

•

Prepare your network and workstations for installation. For details, refer to 

 and 

Installing the Instant Internet software is a two-part process. First, configure the 
Instant Internet unit. Second, install the software. Installing the client software on 
each workstation allows you to identify the user and control access or log activity 
for that user. Installing the client software on IP workstations is optional; however, 
you must install the client software on IPX workstations.

— Configure the Instant Internet unit according to your network 

environment.

— Configure your connection. This process is different for each connection 

type available. Select the installation procedure from the list of common 
connection environments.

— Copy the Instant Internet client and management software to the network.

— Install the Instant Internet client software on each workstation. You can 

also install the Instant Internet management software on each 
workstation. For IP networks, you must also configure each workstation 
to either obtain an IP address from a DHCP server or to use Instant 
Internet as a gateway and DNS proxy. For details, refer to 

Use the installation flowchart 

 to determine your network environment 

and then proceed with the installation. You can install and configure the Instant 
Internet unit from any workstation that has access to your network.

 is an installation decision flowchart that you can use to identify your 

network environment and to decide which installation procedures to follow. If you 
do not know the answer to some of the questions, you can install Instant Internet 
and follow the prompts.