Инструкции По Установке для 3com S7906E
1-17
Creating a pure eBGP peer group
Follow these steps to configure a pure eBGP group:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Enter IPv6 address family view
ipv6-family
—
Create an eBGP peer group
group ipv6-group-name
external
external
Required
Configure the AS number for
the peer group
the peer group
peer ipv6-group-name
as-number as-number
as-number as-number
Required
Not configured by default.
Add an IPv6 peer into the peer
group
group
peer ipv6-address group
ipv6-group-name
ipv6-group-name
Required
Not added by default
z
To create a pure eBGP peer group, you need to specify an AS number for the peer group.
z
If a peer was added into an eBGP peer group, you cannot specify any AS number for the peer
group.
Creating a mixed eBGP peer group
Follow these steps to create a mixed eBGP peer group:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Enter IPv6 address family view
ipv6-family
—
Create an eBGP peer group
group ipv6-group-name
external
external
Required
Specify the AS number of an
IPv6 peer
IPv6 peer
peer ipv6-address as-number
as-number
as-number
Required
Not specified by default.
Add the IPv6 peer into the peer
group
group
peer ipv6-address group
ipv6-group-name
ipv6-group-name
Required
Not added by default