Инструкции По Установке для 3com S7906E
1-18
When creating a mixed eBGP peer group, you need to create a peer and specify its AS number that can
be different from AS numbers of other peers, but you cannot specify AS number for the eBGP peer
group.
Configuring IPv6 BGP Community
Advertise community attribute to an IPv6 peer/peer group
Follow these steps to advertise community attribute to an IPv6 peer/peer group:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Enter IPv6 address family view
ipv6-family
—
Advertise community attribute
to an IPv6 peer/peer group
to an IPv6 peer/peer group
peer { ipv6-group-name |
ipv6-address }
advertise-community
ipv6-address }
advertise-community
Required
Not advertised by default.
Advertise extended community
attribute to an IPv6 peer/peer
group
attribute to an IPv6 peer/peer
group
peer { ipv6-group-name |
ipv6-address }
advertise-ext-community
ipv6-address }
advertise-ext-community
Required
Not advertised by default.
Apply a routing policy to routes advertised to a peer/peer group
Follow these steps to apply a routing policy to routes advertised to a peer/peer group:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Enter IPv6 address family view
ipv6-family
—
Apply a routing policy to routes
advertised to an IPv6 peer/peer
group
advertised to an IPv6 peer/peer
group
peer { ipv6-group-name |
ipv6-address } route-policy
route-policy-name export
ipv6-address } route-policy
route-policy-name export
Required
Not applied by default.
z
When configuring IPv6 BGP community, you need to configure a routing policy to define the
community attribute, and apply the routing policy to route advertisement.
z
For routing policy configuration, refer to Routing Policy Configuration in the IP Routing Volume.