Руководство Пользователя для Spectra Logic nastape 100
Chapter 4. Using the Serial Port Interface
32
Password Configuration
As shipped, the serial port configuration menu is not password protected. To prevent
unauthorized changing of NAStape configuration settings, you can enable a password.
unauthorized changing of NAStape configuration settings, you can enable a password.
1.
Select
1
from the TAOS Configuration Menu.
2.
The Password Configuration Menu is displayed (Figure 4-3).
[1] Set Username:
Select to set or change the username.
[2] Set Password:
Select to set or change the password. If changing the password,
you will be prompted to enter your password, then to re-enter it.
Note:
This password is also used to validate firmware updates using FTP.
[?] Help:
Displays help for this menu.
[ESC] Return to previous menu:
Returns you to the TAOS Configuration Menu.
3.
Select
1
to set a configuration username, then select
2
to set a configuration
password.
4.
Press Esc to return to the TAOS Configuration Menu.
There will be an asterisk (
*
) next to the menu option, indicating that an unsaved
change has been made.
5.
Select
9
from the TAOS Configuration Menu to save the changes.
6.
Select
y
when prompted to reboot.
Note:
You must reboot the NAStape in order for the username and
password changes to take effect.
password changes to take effect.
Figure 4-3 The Password Configuration Menu.