Руководство Пользователя для Spectra Logic nastape 100

Chapter 4. Using the Serial Port Interface

[2] Hostname:

The name for the IP interface. This is used by DHCP, DNS and other

communications for name resolution. The hostname should be less than 12
characters to support DHCP and DNS naming conventions.

[3] IP address:

Static IP address. This field is not available while in DHCP mode.

[4] IP subnet mask:

IP network mask (standard IP parameter). This field is not

available while in DHCP mode.

[5] IP gateway:

Gateway address (standard IP parameter). This field is not

available while in DHCP mode.

[6] Enable WINS:

Typing

will toggle WINS on and off.

[7] WINS server:

When WINS is enabled, it is necessary to specify the address of

the WINS server.

[8] User Name:

This username parameter is used for authentication for iSCSI and

NDMP protocols. Type

, then type a new username.

[9] Password:

Select or change the password. If changing the password, you will

be prompted to enter your password then to re-enter it.

[?] Help:

Displays help for this menu.

[ESC] Return to previous menu:

Returns you to the TAOS Configuration Menu.

Press Esc to return to the TAOS Configuration Menu.

There will be an asterisk (

) next to the menu option, indicating that an unsaved

change has been made.

Select

to save the changes.

Select

when prompted to reboot.

Note:

You must reboot the NAStape in order for the new Ethernet
parameters to take effect.

Procedure Notes

You can continue to configure your NAStape using the serial port, or you can use the
Web interface, which is more user–friendly. Use the information from the Ethernet
Configuration screen to assist with attaching the NAStape to an IP connection. To use
the Web interface, go to Chapter 3. Using the HTTP Interface on page 17.