Руководство Пользователя для Spectra Logic nastape 100
Chapter 4. Using the Serial Port Interface
35
iSCSI
1.
To launch the iSCSI Configuration Menu, select
6
from the TAOS Configuration
2.
Configure iSCSI using the TAOS iSCSI Configuration Menu (Figure 4-5).
The TAOS iSCSI Configuration Menu gives you the following options:
[1] Authentication:
Choose an authentication method: CHAP, SRP or None.
[2] Header Digest:
Choose a header digest: CRC-32 or None.
[3] Data Digest:
Choose a data digest: CRC-32 or None.
[4] iSCSI Port:
The default iSCSI port number is 3260. This is the IANA assigned
port for iSCSI and should not be modified under normal conditions.
[5] Enable iSNS:
Choose to enable or disable iSNS. When iSNS is enabled it is
necessary to specify the IP address of the iSNS server.
[6] iSNS Server Address:
Enter the IP address of the iSNS server. This must be a valid
server IP whenever iSNS is enabled.
[7] iSNS Server Port:
The default port (3205) is assigned by IANA and should not be
modified under normal conditions.
[?] Help:
Displays help for this menu.
[ESC] Return to previous menu:
Returns you to the TAOS Configuration Menu.
3.
Press Esc to return to the TAOS Configuration Menu.
There will be an asterisk (
*
) next to the menu option, indicating that an unsaved
change has been made.
Figure 4-5 The TAOS iSCSI Configuration Menu.