Release Note для Spectra Logic spectra t120
BlueScale10.0.4-20070926F
135
BlueScale10.0.4-20070926F
Resolved Issues
The General Status screen now displays properly for library users with operator
privileges.
privileges.
BlueScale10.0.3-20070830F
To take advantage of LTO-4 SCSI QIP-attached drives and the new power metrics
features, download the latest library firmware from the Spectra Logic Web site.
features, download the latest library firmware from the Spectra Logic Web site.
Enhancements
LTO-4 SCSI Support – The library now supports LTO-4 SCSI drives when used
with a Quad Interface Processor (QIP). With this release of the current drive
firmware, the SCSI negotiation speed of the drive is forced to u160.
firmware, the SCSI negotiation speed of the drive is forced to u160.
Power Usage and Storage Density Metrics – The library’s LC/RLC now displays
the power usage and storage density information for the library in a more
accessible form.
accessible form.
Resolved Issues
Encryption with compression in fixed mode now reads/writes correctly.
Cleartext is now enabled properly at the beginning of tape, so that BlueScale
Cleartext is now enabled properly at the beginning of tape, so that BlueScale
Encryption correctly verifies that all the data is encrypted and none is in cleartext.
The LCM now responds if you try to edit or delete a partition that is configured for
encryption.
Known Issues
The drive firmware currently does not support u320 negotiation speeds; as soon as
such firmware is available, it will be provided, allowing the faster negotiation
speeds.
speeds.
We do not recommend attaching more than one LTO-4 direct-attach drive per SCSI
bus.
If you intend to use daisy-chained LTO SCSI drives, the cable between the drives
should be at least 10 feet.